Trinity House - Procurement Portal

Return to the Trinity House main site

Buyer Profile

Return to Buyer Profile

< Previous Notices Next Notice >



UK-London: Fabrication work.
Section I: Contracting Authority
I.1) Name and addresses
Trinity House
Trinity Square, Tower Hill, London, EC3N 4Dh, United Kingdom
Tel. +44 1255245000, Email: etender@trinityhouse.co.uk
Contact: Procurement
Main Address: http://www.trinityhouse.co.uk
NUTS Code: UK
I.2) Joint procurement
The contract involves joint procurement: No.
In the case of joint procurement involving different countries, state applicable national procurement law: Not provided
The contract is awarded by a central purchasing body: No.
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: https://www.delta-esourcing.com/tenders/UK-UK-London:-Fabrication-work./DT948J8B3D
Additional information can be obtained from: the abovementioned address
Tenders or requests to participate must be sent to the abovementioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Other activity:

Section II: Object
II.1) Scope of the procurement
II.1.1) Title: T0454 - LAS Components and Mechanical Fabrication Framework
Reference Number: T0454
II.1.2) Main CPV Code:
45255400 - Fabrication work.

II.1.3) Type of contract: WORKS
II.1.4) Short description: The purpose of this Invitation to Tender is to address the requirements for the Mechanical Fabrication needs of this maintenance and investment programme, with the aim of establishing a Framework Agreement for the supply of LAS units (and associated components) as well as Framework Agreement/s for all other Mechanical Fabrication needs as may be required from time to time.
II.1.5) Estimated total value:
Value excluding VAT: 616,000
Currency: GBP
II.1.6) Information about lots:
This contract is divided into lots: Yes
Tenders may be submitted for: All lots
Maximum number of lots that may be awarded to one tenderer: Not provided
The contracting authority reserves the right to award contracts combining the following lots or groups of lots: Not provided

II.2) Description
II.2) Description Lot No. 1

II.2.1) Title: LAS Superstructure
Lot No: 1
II.2.2) Additional CPV codes:
45255400 - Fabrication work.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: To manufacture and deliver LAS Superstructure to specification 402/220 sheets 1 to 11 and all associated componentry (403/226 sheet 1, 450/002, 450/011 sheets 1 to 3, 450/012 sheets 1 to 3). Delivery to be made to Harwich or Swansea locations on pallets.
II.2.5) Award criteria:
Price is not the only award criterion and all criteria are stated only in the procurement documents
II.2.6) Estimated value:
Value excluding VAT: 240,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 48
This contract is subject to renewal: Yes
Description of renewals: Two Optional 12 Month Extensions

II.2.10) Information about variants:
Variants will be accepted: Yes
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: No
Identification of the project: Not provided
II.2.14) Additional information: Not provided
II.2) Description Lot No. 2

II.2.1) Title: Mechanical Fabrications
Lot No: 2
II.2.2) Additional CPV codes:
45255400 - Fabrication work.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: To manufacture and deliver component parts or assemblies as specified by Trinity House over the course of the Agreement. To provide an indication of the range of componentry required by Trinity House, a selection of current/past specifications has been included for reference and quotation purposes.

This Lot is sub-divided into:
Lot 2a Stainless Steel
Lot 2b Aluminium
Lot 2c Mild Steel
Lot 2d Any mixed materials
II.2.5) Award criteria:
Price is not the only award criterion and all criteria are stated only in the procurement documents
II.2.6) Estimated value:
Value excluding VAT: 320,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 48
This contract is subject to renewal: Yes
Description of renewals: Two Optional 12 Month Extensions

II.2.10) Information about variants:
Variants will be accepted: Yes
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: No
Identification of the project: Not provided
II.2.14) Additional information: Not provided


Section III: Legal, Economic, Financial And Technical Information
III.1) Conditions for participation
III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions:
Not Provided
III.1.2) Economic and financial standing
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.3) Technical and professional ability
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.5) Information about reserved contracts (if applicable)
The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No
The execution of the contract is restricted to the framework of sheltered employment programmes: No

III.2) Conditions related to the contract

III.2.2) Contract performance conditions
Not Provided
III.2.3) Information about staff responsible for the performance of the contract
Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
IV.1) Description OPEN
IV.1.1) Type of procedure: Open

IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement
Framework agreement with several operators
Envisaged maximum number of participants to the framework agreement:
Not Provided
In the case of framework agreements justification for any duration exceeding 4 years: Not Provided


IV.1.6) Information about electronic auction:
An electronic auction will be used: No
Additional information about electronic auction: Not provided
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: No
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure:
Notice number in the OJ S: Not provided
IV.2.2) Time limit for receipt of tenders or requests to participate
Date: 10/06/2020 Time: 12:00

IV.2.4) Languages in which tenders or requests to participate may be submitted: English,
IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
Duration in month(s): 12

IV.2.7) Conditions for opening of tenders:
Date: 10/06/2020
Time: 14:00
Place:
Harwich


Section VI: Complementary Information
VI.1) Information about recurrence
This is a recurrent procurement: Yes
Estimated timing for further notices to be published: Not provided
VI.2) Information about electronic workflows
Electronic ordering will be used Yes
Electronic invoicing will be accepted Yes
Electronic payment will be used Yes
VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://www.delta-esourcing.com/tenders/UK-UK-London:-Fabrication-work./DT948J8B3D

To respond to this opportunity, please click here:
https://www.delta-esourcing.com/respond/DT948J8B3D
VI.4) Procedures for review
VI.4.1) Review body:
The Corporation of Trinity House
Tower Hill, London, EC3N 4DH, United Kingdom
Tel. +44 1255245000, Email: etender@trinityhouse.co.uk
Internet address: http://www.trinityhouse.co.uk
VI.4.2) Body responsible for mediation procedures:
Not provided
VI.4.3) Review procedure
Precise information on deadline(s) for review procedures:
Not Provided
VI.4.4) Service from which information about the lodging of appeals may be obtained:
Not provided
VI.5) Date Of Dispatch Of This Notice: 27/04/2020

Annex A




< Previous Notices Next Notice >



Return to Buyer Profile